HERTZ HCP 5MD
539,00 €
& Free Shipping for orders over €300 — max total weight 3 kg.Compact design marine amplifier
- 1500W
- 4.1/2.1 channel
Availability: In stock (can be backordered)
HERTZ Marine Amplifier 1500 W | 5 – 3 channels
HCP 5MD marine amplifier features a compact design ready to face the open water environment, providing tons of clean power. The heat sink has been crafted from extruded aluminium, a material unmatched for lightness, robustness and heat dissipation. To keep size to a minimum, the power transistors are placed between the PCB and the top side of the heat sink where heat is gathered. Built up heat is then directed to the special dissipation “wings” along the side of the amplifier.
Both Pre-In and Speaker-In inputs feature a special balanced circuitry, ensuring high rejection against electro-magnetic interferences for noise-free results. The HCP M amplifiers crossover section ensure extreme flexibility: fully adjustable Lo-pass, Hi-pass filters with 12 dB/Oct. and 24 dB/Oct. slopes according to the amplifier model; Bass Boost is also available to enhance low frequencies.
HCP 5MD is suitable for a five channel system (4 speakers + sub) or a tree channel system (2 speakers + sub) using the front and rear built-in filters that also include a bass boost circuit and a subsonic filter.
Features :
General Specs
| Channels | 5 – 3 |
| POWER SUPPLY | |
| Power supply voltage / fuse: | 11 ÷ 15 VDC / 2 x 25 A |
| ldling current (power ON/OFF): | 2 A / 0.04 mA |
| Consumption@ 1Ω, 14.4 VDC (Max Musical Power): | 30 A |
| Remote In: | 7 ÷ 15 VDC – 1 mA |
| ART: | Automatic Remote Turn-OniOff with Speaker-ln |
| AMPLIFIER STAGE | |
| Distorsion – TliD (100Hz @ 4Ω): | 0.02% |
| Bandwidth: | 10 ÷ 50 kHz |
| Bandwidth: | 10 ÷ 500 Hz |
| S/N Ratlo (A welghted @ 1 V): | 100 dB |
| Damping factor (100Hz @ 4Ω) FRONT/REAR: | 100 |
| Damping factor (100Hz @ 4Ω) SUB: | 250 |
| Pre-ln sensitivity: | 0.2 ÷ 5 VRMS |
| Speaker-ln sensitivity: | 0.8 ÷ 20 VRMS |
| Load impedance (MIN) @5Ch: @3Ch: |
2 Ω 4 Ω + 4 Ω + 2 Ω |
| Max size (mm/in): | 345 x 190 x 50 13.58 x 7.48 x 1.97 |
| Weight (kg/lb): | 2.61 (5.75) |
| Adjustable Crossovers | yes |
| OUTPUT POWER (RMS) @ 28.8 VDC, THD 1% | |
| 5Ch | 55 W x 4+160 W x 1 (4Ω) |
| 5Ch | 90 W x 4+ 280 W x 1 (2 Ω) |
| 3Ch | 180 W x 2 (4 Ω) +160 W x 1 (4 Ω) |
| 3Ch | 180 W x 2 (4 Ω) + 280 W x 1 (2 Ω) |
| OUTPUT POWER (RMS) @ 28.8 VDC, THD 10% | |
| 5Ch | 65 W x 4 + 200 W x 1 (4Ω) |
| 5Ch | 105 W x 4 + 330 W x 1 (2 Ω) |
| 3Ch | 210 W x 2 (4 Ω) + 200 W x 1 (4 Ω) |
| 3Ch | 210 W x 2 (4 Ω) + 330 W x 1 (2 Ω) |
| CEA 2006-A RATINGS | |
| RMS Power (4 Ω, ≤ 1 % THD+N,14.4 V): | 50 W x 4 Ch + 150 W x 1 Ch |
| S/N Ratio (ref. 1 W output) | (50 W Ch) 83 dBA (150 W Ch) 85 dBA |
| Total Power | 1500 W |
| lnputs: | |
| FRONT Ch. filters FULL: | Yes |
| Hi-Pass: | 50 ÷ 5 kHz @ 12 dB/Oct |
| REAR Ch. filters FULL: | Yes |
| Hi-Pass: | 50 ÷ 5 kHz @ 12 dB/Oct |
| Band-Pass: | 50 ÷ 500 Hz (Hi) @ 12 dB/Oct 50 ÷ 5 kHz (Lo) @ 12 dB/Oct |
| SUB Ch. filter LO-PASS: | 50 ÷ 500 Hz (Hi) @ 24 dB/Oct |
| SUBSONIC (on/off): | 25 Hz @ 24 dB / Oct |
| BOOST 50 Hz (adjust): | (0÷12) dB |
| Remote Volume Control: | (-50 ÷ 6) dB |
| mm | in | |
| A | 345 | 13.58 |
| B | 321 | 12.64 |
| C | 190 | 7.48 |
| D | 166 | 6.53 |
| E | 50 | 1.97 |
| Weight | 3 kg |
|---|---|
| Dimensions | 34,5 × 19 × 4,8 cm |
| VENDOR |
